WizNET Connection for TOPCON using MAGNET Field V8.x
Revolutionize Your Surveying & Mapping with WizNET
Contact for a quote
From the main menu select Configure
Select Survey
Select Add
Name your new style. We suggest WizNET. Then the Checkmark
Under Type choose Network RTK Under the corrections drop down you can select VRS, then Next
Under Protocol choose NTRIP 1.0 or NTRIP2.0/1.0, then Next
For the Rover type Select Topcon, then Next
Receiver type is likely HiperVR but we support older receivers as well. Then hit Next
Select you default antenna height. Usually 2.0m, then Next
Select controller. Type is internal cellular, then Next
Select Add, then Next
Input the details provided to you in your welcome email. Hit Next through the next several screens setting the options as desired
On the tracking screen select all options, then Next
On the advanced screen select Extrapolation, and base type as Other, then Next
Continue hitting next until the last screen hit the green checkmark to save this new survey style.
Now, from the main screen hit Connect
Choose GNSS Hit Connect again
Select your receiver from the list or Refresh to scan then select your receiver by it’s serial number
Hit Connect again
Once connected the software will query the available mountpoints from the network. Refresh by hitting the blue circle/arrows if needed.
From the dropdown list choose either RTCM32-MSM for a VRS (Virtual Reference Station) solution or [RTCM-3X-MSM] for a single baseline solution (Nearest physical base station). **Some older receivers should use RTCM-30(VRS) or [RTCM-30](Nearest) but only if the other 2 do not work.
Make your selection and hit connect. You should see “connected as….”
To confirm you are connected go to Setup
Then Status
You should see Fixed near the top of the screen.
You can hit the SVs tab to see what satellites you are tracking
Hit List to see a list and confirm you are tracking all constellations. WizNET supports the latest available satellite systems: USA_GPS. RUSSIA_GLONAS. EUROPE_GAL, CHINA_BDS
